3/16" Heat shrink
Tubing.
repairing battery,
motor and speed
controllers on
small electric
models. Contains
color matching
heat shrink tubing
to match many
popular motors
and speed
controllers, such
as the Trex450.

Includes 7 pcs of
heat shrink tubing
4" long.

FMP1157  $4.00
1/4" Heat Shrink
Tubing.
Matches colors
and size of our
Braided wire
protection Kits.
Also used for
repair of high out
put motors,
batteries and
speed controllers
on larger models,
such as the
Trex600.

Includes 7 pcs of
heat shrink tubing.
Each piece is 4"
long.

FMP1158     $4.00
Heat Shrink Tubing Assortments
1/16" heat Shrink
Tubing.
The perfect size
for repairing
micro,  miniature
and standard size
servo and radio
wiring. Contains
color matching
heat shrink tubing
for JR, Spektrum,
Futaba and Hitec
servos and wiring.

Includes 6 pcs of
heat shrink tubing
4" long

FMP1154     $3.00
1/8" Heat Shrink
Tubing.
The perfect size
for repairing on
small electric
motors, batteries  
and speed
controllers.

Includes 6 pcs of
heat shrink tubing
4" long


FMP1156  $3.50
3/32" Heat Shrink
Tubing.
The perfect size
for repairing heavy
duty size servo
and radio wiring.
Contains color
matching heat
shrink tubing for
JR, Spektrum,
Futaba and Hitec
servos and wiring.

Includes 6 pcs of
heat shrink tubing
4" long

FMP1155   $3.00
Fortune Model Products,LLC
7610 Broken Hickory Dr
Walls, Ms 38680
Ph (662)-781-8262
Fax (662)-781-8261
Email
Mike@fortunemodelproducts.com
Special 3 to 1 heat shrink tubing
Special 3 to 1 high shrink rate heat shrink tubing is the perfect choice for securing servo and
extension  connectors. Each 2" piece of 3 to 1 heat shrink tubing shrinks to form a lock around
the connector making it impossible for the connector to unintentionally be disconnected. Also,
helps to seal against fuel and oil for exposed wiring and connectors such as gyros and tail rotor
servos.

Special 3 to 1 heat shrink tubing can also be used to capture important information concerning
servos or connections. Simply write info on white 3 to 1 heat shrink tubing using a fine line
marker. Special heat shrink tubing require only heat available from hobby type covering heat
guns for shrinkage.

FMP1230                3/8" , 3 to 1 heat shrink tubing- 5 pcs per package, Black           $3.25
FMP1231                3/8" , 3 to 1 heat shrink tubing- 5 pcs per package, White           $3.25
Each package contains 5
pcs approximately 2" long.
shrink tubing over servo
Slide special 3 to 1 heat
connector being sure
connector is centered
within special 3 to 1 heat
shrink tubing.
Join servo and extension
connector as normal.
Apply heat from heat gun
or hobby type airplane
covering gun evenly
around 3 to 1 heat shrink
tubing. Remove heat when
special 3 to 1 heat shrink
tubing has shrunk around
connector.  Excessive heat
is not necessary for
special 3 to 1 heat shrink
tubing to form around
connector.
Special 3 to 1 heat shrink tubing can be cut in
half to identify servo connections, important
maintenance history and  servo age,ect.
Black
White